NXL Monaural Type Tension Cable Clip/Wedge Dead End Clamp
Use And Specification
NXL single lug series wedge tensioning clamps are easy and convenient to install, without additional tools, shortening the installation time and improving the installation efficiency. It can increase the tensile capacity of the cable, reduce the vibration of the cable, and effectively extend the service life. The surface has been specially treated, which can well resist the erosion of wind, sun, corrosion and other harsh environments, prolonging the product life and reducing the cost of use.
|
Model |
Applicable wire outer diameter (mm) |
Overhead insulated aluminum |
Nominal breaking load (kN) |
Polyethylene insulation cover |
|
NXL-1 |
Φ 6.0-9.0 |
35-50 |
7.4 |
NXL-1-2Z |
|
NXL-2 |
Φ 9.0-12.0 |
70-95 |
14.5 |
NXL-1-2Z |
|
NXL-3 |
Φ 12.0-15.0 |
120-150 |
22.1 |
NXL-3Z |
|
NXL-4 |
Φ 15.0-19.0 |
185-240 |
36.5 |
NXL-4Z |
Summary
NXL is mainly applied to 10kV and below transmission and distribution lines, its wedge design makes the fixture can fix the wires well, at the same time, the single-ear design of the fixture also facilitates the installation and dismantling of the fixture. The fixture can well withstand the wind, sun, corrosion and other harsh environments, prolonging the product life and reducing the cost of use. Can distribute the pressure of the cable, making the cable in the use of the process of the force of the average, reduce the wear and tear of the cable, prolong the life of the cable.
Packing: Generally, we use wooden cases for packing and transportation. If you have any special requirements, please let us know.
Delivery: Usually, it will take about 20-25 days for the order of 10000 sets for production.
Payment terms: By T/T.
