-
Rapid Delivery for Adss Cable Preformed Tension Clamp For Dead End Pole - OPGW Extra Strength Double Performed Tension Set Two Way Dead End Clamp Guy Grip Fiber Optic Accessories for OPGW – Henvcon
Usage and characteristics OPGW Extra-Strength Double Helical Tension Set is special designed for cable installation on large span,high fall and big corner over head line,where the cable RTS is larger than 160KN. It is composed of three layers construction,including inner reinforcing rods,structural reinforcing rods and outer layer Dead-ends.This structure improves the tensile strength of Helical Tension set,without restriction such as line turn-angle.A complete set of OPGW Extra-Strength Doub... -
China Factory for Pvc Single Top Tie For Acsr Line - Copper Clad Steel Line Splice – Henvcon
Usage and characteristics With regarding to the conductor in one raw material, the preformed line splice will 100% recover the mechanical strength of conductors whether they are damaged or spliced. Meanwhile, the conductivity will also be greatly improved within the length of splicing. Diagrammatic Drawing of Installation Packing /shipping/ Terms of Payment Packaging: preformed guy grip according to the concrete product， Usually packed with cartons, wooden cases(as customer’s require... -
Lowest Price for Galvanized Helical Dead End Strain Clamp - Preformed Tension Dead-end For Conductor – Henvcon
Usage and characteristics Preformed Tension Dead-end is used in the installation of the exposed conductor used in electric network transmission and distribution and overhead insulated conductor. The reliability and economic advantage is better than the present bolt type and hydraulic compression type Tension Dead-end which now is being widely in the line. The structure of the Preformed Tension Dead-end is simple , and the pipe structure formed by the two legs of the preformed line would enlac... -
Online Exporter Cross Arm Clevis For Opgw Cable - Bird Flight Diverter, Helical PVC Bird Driving Device – Henvcon
Usage and characteristics The Preformed Line Product flight Diverter is designed for use on overhead conductors to create greater visibility for avian flight paths on overhead lines and tower down guys. Offering little wind resistance, it reduces hazards to both lines and birds. For low and medium voltage construction, apply flight Diverter to phase conductors (bare or jacketed). For high voltages, it is typically used on shield wire.Flight Diverter is lightweight, offers little wind resistan... -
China Cheap price Turnbuckle Stay Rod For Acsr - PVC Plastic insulator tie – Henvcon
Usage and characteristics PVC plastic single line/top ties are intended for use with covered conductors and vertically-mounted tie top insulators on cross arms or pole-top-mounted insulators.Line angles of up to 15°can be accommodated when used with any plastic covered conductor. Material: PVC plastic single line/top ties are made from white PVC.This material has the advantages:UV resistance,tensile strength,impact strength, flexural strength and self-extinguishing properties. Packing /shipp... -
China Supplier Plastic Side Tie For Adss - Medium/Long Span ADSS Tension Set – Henvcon
Usage and characteristics Medium/Long Span ADSS Tension Set is composed of Dead-end component and structural reinforcing rods,the materials are aluminum-clad steel or galvanized steel wire,it is mainly used for ADSS installation between strain tower/pole,corner tower/pole and terminal tower/pole which span length is larger than 200M with RTS of the cable is larger than 15KN,Medium Span ADSS Tension set is used for installation span length between 200-400M,Long Span ADSS Tension set is used fo... -
Hot sale Preformed Guy Grip Electrical Hardware For Adss - OPGW Extra Strength Double Performed Tension Set Two Way Dead End Clamp Guy Grip Fiber Optic Accessories for OPGW – Henvcon
Usage and characteristics OPGW Extra-Strength Double Helical Tension Set is special designed for cable installation on large span,high fall and big corner over head line,where the cable RTS is larger than 160KN. It is composed of three layers construction,including inner reinforcing rods,structural reinforcing rods and outer layer Dead-ends.This structure improves the tensile strength of Helical Tension set,without restriction such as line turn-angle.A complete set of OPGW Extra-Strength Doub... -
Reliable Supplier Galvanized Pole Clamp - PVC Plastic insulator tie – Henvcon
Usage and characteristics PVC plastic single line/top ties are intended for use with covered conductors and vertically-mounted tie top insulators on cross arms or pole-top-mounted insulators.Line angles of up to 15°can be accommodated when used with any plastic covered conductor. Material: PVC plastic single line/top ties are made from white PVC.This material has the advantages:UV resistance,tensile strength,impact strength, flexural strength and self-extinguishing properties. Packing /shipp... -
Factory wholesale Joint Box Cap-Type Metal Adss For Tower - Copper Clad Steel Line Splice – Henvcon
Usage and characteristics With regarding to the conductor in one raw material, the preformed line splice will 100% recover the mechanical strength of conductors whether they are damaged or spliced. Meanwhile, the conductivity will also be greatly improved within the length of splicing. Diagrammatic Drawing of Installation Packing /shipping/ Terms of Payment Packaging: preformed guy grip according to the concrete product， Usually packed with cartons, wooden cases(as customer’s require... -
Popular Design for Universal Pole Bracket For Adss Cable Anchor Clamp - Copper Clad Steel Preformed Armor Rod – Henvcon
Usage and characteristics The main function of the armor rods is to protect conductors/strands against bending, compression, abrasion and arcover damage and to provide restorative repair. ERY IMPORTANT: The lay direction of the fittings must be identical to the outer layer of the specified conductor. The rods of the fitting are refaced in the ends to avoid damages in the assembly and to the specified conductor. Refacing of the ends is made by abrasion in the rods up to 4,62 mm. When the rods ... -
Factory making Anchor Rod - Medium/Long Span ADSS Tension Set – Henvcon
Usage and characteristics Medium/Long Span ADSS Tension Set is composed of Dead-end component and structural reinforcing rods,the materials are aluminum-clad steel or galvanized steel wire,it is mainly used for ADSS installation between strain tower/pole,corner tower/pole and terminal tower/pole which span length is larger than 200M with RTS of the cable is larger than 15KN,Medium Span ADSS Tension set is used for installation span length between 200-400M,Long Span ADSS Tension set is used fo... -
Well-designed Cross Arm Clevis - Copper Clad Steel Preformed Armor Rod – Henvcon
Usage and characteristics The main function of the armor rods is to protect conductors/strands against bending, compression, abrasion and arcover damage and to provide restorative repair. ERY IMPORTANT: The lay direction of the fittings must be identical to the outer layer of the specified conductor. The rods of the fitting are refaced in the ends to avoid damages in the assembly and to the specified conductor. Refacing of the ends is made by abrasion in the rods up to 4,62 mm. When the rods ...
- Call Support +86 189 2541 8659
- Email Support sales01@henvcon.com
