Guangdong Henvcon Electric Power Technology CO., LTD.
English
Home
Products
About Us
Service
News
Activity News
Industry News
Video
Exhibition
Contact Us
Call Support
+86 189 2541 8659
Email Support
sales01@henvcon.com
Home
Featured
Featured
China Manufacturer for Round Type Adss Firtting With J Hook Suspension Clamp - OPGW Extra Strength Double Performed Tension Set Two Way Dead End Clamp Guy Grip Fiber Optic Accessories for OPGW – Henvcon
Usage and characteristics OPGW Extra-Strength Double Helical Tension Set is special designed for cable installation on large span,high fall and big corner over head line,where the cable RTS is larger than 160KN. It is composed of three layers construction,including inner reinforcing rods,structural reinforcing rods and outer layer Dead-ends.This structure improves the tensile strength of Helical Tension set,without restriction such as line turn-angle.A complete set of OPGW Extra-Strength Doub...
inquiry
detail
Top Suppliers Vibration Dampers For Adss - Medium/Long Span ADSS Tension Set – Henvcon
Usage and characteristics Medium/Long Span ADSS Tension Set is composed of Dead-end component and structural reinforcing rods,the materials are aluminum-clad steel or galvanized steel wire,it is mainly used for ADSS installation between strain tower/pole,corner tower/pole and terminal tower/pole which span length is larger than 200M with RTS of the cable is larger than 15KN,Medium Span ADSS Tension set is used for installation span length between 200-400M,Long Span ADSS Tension set is used fo...
inquiry
detail
100% Original Stock Bridge Vibration Dampers For Opgw - Spiral Vibration Damper For Helical Accessories – Henvcon
Usage and characteristics Spiral Vibration Damper is made of engineering plastic which is high strength,aging resistance and high elastic;it will not cause any mechanical damage to the optical fiber caber. Spiral Vibration Damper is widely used in ADSS cable installation.Each Spiral Vibration Damper is composed of a short part of grip section and a long vibration attenuation section.the grip section can affective close upon the cable to make sure the spiral vibration damper is firmly fixed on...
inquiry
detail
New Fashion Design for Single Side Tie - PVC Plastic insulator tie – Henvcon
Usage and characteristics PVC plastic single line/top ties are intended for use with covered conductors and vertically-mounted tie top insulators on cross arms or pole-top-mounted insulators.Line angles of up to 15°can be accommodated when used with any plastic covered conductor. Material: PVC plastic single line/top ties are made from white PVC.This material has the advantages:UV resistance,tensile strength,impact strength, flexural strength and self-extinguishing properties. Packing /shipp...
inquiry
detail
New Arrival China Prefomed Guy Grip Dead End - Bird Flight Diverter, Helical PVC Bird Driving Device – Henvcon
Usage and characteristics The Preformed Line Product flight Diverter is designed for use on overhead conductors to create greater visibility for avian flight paths on overhead lines and tower down guys. Offering little wind resistance, it reduces hazards to both lines and birds. For low and medium voltage construction, apply flight Diverter to phase conductors (bare or jacketed). For high voltages, it is typically used on shield wire.Flight Diverter is lightweight, offers little wind resistan...
inquiry
detail
PriceList for Stock Vibration Dampers For Opgw - Spiral Vibration Damper For Helical Accessories – Henvcon
Usage and characteristics Spiral Vibration Damper is made of engineering plastic which is high strength,aging resistance and high elastic;it will not cause any mechanical damage to the optical fiber caber. Spiral Vibration Damper is widely used in ADSS cable installation.Each Spiral Vibration Damper is composed of a short part of grip section and a long vibration attenuation section.the grip section can affective close upon the cable to make sure the spiral vibration damper is firmly fixed on...
inquiry
detail
Good Quality Pvc Top Ties - PVC Plastic insulator tie – Henvcon
Usage and characteristics PVC plastic single line/top ties are intended for use with covered conductors and vertically-mounted tie top insulators on cross arms or pole-top-mounted insulators.Line angles of up to 15°can be accommodated when used with any plastic covered conductor. Material: PVC plastic single line/top ties are made from white PVC.This material has the advantages:UV resistance,tensile strength,impact strength, flexural strength and self-extinguishing properties. Packing /shipp...
inquiry
detail
Factory wholesale Corss Arm Bracket On Pole - Bird Flight Diverter, Helical PVC Bird Driving Device – Henvcon
Usage and characteristics The Preformed Line Product flight Diverter is designed for use on overhead conductors to create greater visibility for avian flight paths on overhead lines and tower down guys. Offering little wind resistance, it reduces hazards to both lines and birds. For low and medium voltage construction, apply flight Diverter to phase conductors (bare or jacketed). For high voltages, it is typically used on shield wire.Flight Diverter is lightweight, offers little wind resistan...
inquiry
detail
Short Lead Time for Opgw Fitting Fasten Clamp - Copper Clad Steel Line Splice – Henvcon
Usage and characteristics With regarding to the conductor in one raw material, the preformed line splice will 100% recover the mechanical strength of conductors whether they are damaged or spliced. Meanwhile, the conductivity will also be greatly improved within the length of splicing. Diagrammatic Drawing of Installation Packing /shipping/ Terms of Payment Packaging: preformed guy grip according to the concrete product, Usually packed with cartons, wooden cases(as customer’s require...
inquiry
detail
Professional China Stay Rod With Plate ,Bow And Thimble For Acsr - Preformed Tension Dead-end For Conductor – Henvcon
Usage and characteristics Preformed Tension Dead-end is used in the installation of the exposed conductor used in electric network transmission and distribution and overhead insulated conductor. The reliability and economic advantage is better than the present bolt type and hydraulic compression type Tension Dead-end which now is being widely in the line. The structure of the Preformed Tension Dead-end is simple , and the pipe structure formed by the two legs of the preformed line would enlac...
inquiry
detail
Best quality Joint Box Cap-Type Metal Opgw For Pole - OPGW Extra Strength Double Performed Tension Set Two Way Dead End Clamp Guy Grip Fiber Optic Accessories for OPGW – Henvcon
Usage and characteristics OPGW Extra-Strength Double Helical Tension Set is special designed for cable installation on large span,high fall and big corner over head line,where the cable RTS is larger than 160KN. It is composed of three layers construction,including inner reinforcing rods,structural reinforcing rods and outer layer Dead-ends.This structure improves the tensile strength of Helical Tension set,without restriction such as line turn-angle.A complete set of OPGW Extra-Strength Doub...
inquiry
detail
Wholesale Price Joint Box Cap-Type Metal Opgw For Tower - Copper Clad Steel Line Splice – Henvcon
Usage and characteristics With regarding to the conductor in one raw material, the preformed line splice will 100% recover the mechanical strength of conductors whether they are damaged or spliced. Meanwhile, the conductivity will also be greatly improved within the length of splicing. Diagrammatic Drawing of Installation Packing /shipping/ Terms of Payment Packaging: preformed guy grip according to the concrete product, Usually packed with cartons, wooden cases(as customer’s require...
inquiry
detail
<<
< Previous
23
24
25
26
27
28
29
Next >
>>
Page 26 / 287