Guangdong Henvcon Electric Power Technology CO., LTD.

Featured

  • High reputation Vibration Dampers For Preformed Armor Rod - PVC Plastic insulator tie – Henvcon

    High reputation Vibration Dampers For Preformed Armor Rod - PVC Plastic insulator tie – Henvcon

    Usage and characteristics PVC plastic single line/top ties are intended for use with covered conductors and vertically-mounted tie top insulators on cross arms or pole-top-mounted insulators.Line angles of up to 15°can be accommodated when used with any plastic covered conductor. Material: PVC plastic single line/top ties are made from white PVC.This material has the advantages:UV resistance,tensile strength,impact strength, flexural strength and self-extinguishing properties. Packing /shipp...
  • factory low price Electric Power Cable Clamp Hold Hoop For Opgw Cable - Spiral Vibration Damper For Helical Accessories – Henvcon

    factory low price Electric Power Cable Clamp Hold Hoop For Opgw Cable - Spiral Vibration Damper For Helical Accessories – Henvcon

    Usage and characteristics Spiral Vibration Damper is made of engineering plastic which is high strength,aging resistance and high elastic;it will not cause any mechanical damage to the optical fiber caber. Spiral Vibration Damper is widely used in ADSS cable installation.Each Spiral Vibration Damper is composed of a short part of grip section and a long vibration attenuation section.the grip section can affective close upon the cable to make sure the spiral vibration damper is firmly fixed on...
  • Hot-selling Ca Type Pole Bracket - Copper Clad Steel Preformed Armor Rod – Henvcon

    Hot-selling Ca Type Pole Bracket - Copper Clad Steel Preformed Armor Rod – Henvcon

    Usage and characteristics The main function of the armor rods is to protect conductors/strands against bending, compression, abrasion and arcover damage and to provide restorative repair. ERY IMPORTANT: The lay direction of the fittings must be identical to the outer layer of the specified conductor. The rods of the fitting are refaced in the ends to avoid damages in the assembly and to the specified conductor. Refacing of the ends is made by abrasion in the rods up to 4,62 mm. When the rods ...
  • Super Lowest Price Ca Type Pole Bracket With Bolts And Nuts For Opgw Cable - Medium/Long Span ADSS Tension Set – Henvcon

    Super Lowest Price Ca Type Pole Bracket With Bolts And Nuts For Opgw Cable - Medium/Long Span ADSS Tension Set – Henvcon

    Usage and characteristics Medium/Long Span ADSS Tension Set is composed of Dead-end component and structural reinforcing rods,the materials are aluminum-clad steel or galvanized steel wire,it is mainly used for ADSS installation between strain tower/pole,corner tower/pole and terminal tower/pole which span length is larger than 200M with RTS of the cable is larger than 15KN,Medium Span ADSS Tension set is used for installation span length between 200-400M,Long Span ADSS Tension set is used fo...
  • Top Quality Adjustable Plastic Clamp - Preformed Tension Dead-end For Conductor – Henvcon

    Top Quality Adjustable Plastic Clamp - Preformed Tension Dead-end For Conductor – Henvcon

    Usage and characteristics Preformed Tension Dead-end is used in the installation of the exposed conductor used in electric network transmission and distribution and overhead insulated conductor. The reliability and economic advantage is better than the present bolt type and hydraulic compression type Tension Dead-end which now is being widely in the line. The structure of the Preformed Tension Dead-end is simple , and the pipe structure formed by the two legs of the preformed line would enlac...
  • Professional Design Stockbridge Glavanised For Opgw - Preformed Tension Dead-end For Conductor – Henvcon

    Professional Design Stockbridge Glavanised For Opgw - Preformed Tension Dead-end For Conductor – Henvcon

    Usage and characteristics Preformed Tension Dead-end is used in the installation of the exposed conductor used in electric network transmission and distribution and overhead insulated conductor. The reliability and economic advantage is better than the present bolt type and hydraulic compression type Tension Dead-end which now is being widely in the line. The structure of the Preformed Tension Dead-end is simple , and the pipe structure formed by the two legs of the preformed line would enlac...
  • 18 Years Factory Aluminium Wire Tension Strain Dead End Clamp - Bird Flight Diverter, Helical PVC Bird Driving Device – Henvcon

    18 Years Factory Aluminium Wire Tension Strain Dead End Clamp - Bird Flight Diverter, Helical PVC Bird Driving Device – Henvcon

    Usage and characteristics The Preformed Line Product flight Diverter is designed for use on overhead conductors to create greater visibility for avian flight paths on overhead lines and tower down guys. Offering little wind resistance, it reduces hazards to both lines and birds. For low and medium voltage construction, apply flight Diverter to phase conductors (bare or jacketed). For high voltages, it is typically used on shield wire.Flight Diverter is lightweight, offers little wind resistan...
  • Excellent quality Preformed Guy Grip Wire For Opgw - Copper Clad Steel Preformed Armor Rod – Henvcon

    Excellent quality Preformed Guy Grip Wire For Opgw - Copper Clad Steel Preformed Armor Rod – Henvcon

    Usage and characteristics The main function of the armor rods is to protect conductors/strands against bending, compression, abrasion and arcover damage and to provide restorative repair. ERY IMPORTANT: The lay direction of the fittings must be identical to the outer layer of the specified conductor. The rods of the fitting are refaced in the ends to avoid damages in the assembly and to the specified conductor. Refacing of the ends is made by abrasion in the rods up to 4,62 mm. When the rods ...
  • China wholesale Grounding Rod For Transmission Line - Copper Clad Steel Preformed Armor Rod – Henvcon

    China wholesale Grounding Rod For Transmission Line - Copper Clad Steel Preformed Armor Rod – Henvcon

    Usage and characteristics The main function of the armor rods is to protect conductors/strands against bending, compression, abrasion and arcover damage and to provide restorative repair. ERY IMPORTANT: The lay direction of the fittings must be identical to the outer layer of the specified conductor. The rods of the fitting are refaced in the ends to avoid damages in the assembly and to the specified conductor. Refacing of the ends is made by abrasion in the rods up to 4,62 mm. When the rods ...
  • Manufacturer for Helical Tyep Armour Rods For Opgw Cable - OPGW Extra Strength Double Performed Tension Set Two Way Dead End Clamp Guy Grip Fiber Optic Accessories for OPGW – Henvcon

    Manufacturer for Helical Tyep Armour Rods For Opgw Cable - OPGW Extra Strength Double Performed Tension Set Two Way Dead End Clamp Guy Grip Fiber Optic Accessories for OPGW – Henvcon

    Usage and characteristics OPGW Extra-Strength Double Helical Tension Set is special designed for cable installation on large span,high fall and big corner over head line,where the cable RTS is larger than 160KN. It is composed of three layers construction,including inner reinforcing rods,structural reinforcing rods and outer layer Dead-ends.This structure improves the tensile strength of Helical Tension set,without restriction such as line turn-angle.A complete set of OPGW Extra-Strength Doub...
  • Original Factory Dead End Clamp For Cable Adss - Spiral Vibration Damper For Helical Accessories – Henvcon

    Original Factory Dead End Clamp For Cable Adss - Spiral Vibration Damper For Helical Accessories – Henvcon

    Usage and characteristics Spiral Vibration Damper is made of engineering plastic which is high strength,aging resistance and high elastic;it will not cause any mechanical damage to the optical fiber caber. Spiral Vibration Damper is widely used in ADSS cable installation.Each Spiral Vibration Damper is composed of a short part of grip section and a long vibration attenuation section.the grip section can affective close upon the cable to make sure the spiral vibration damper is firmly fixed on...
  • Hot New Products Armor Rod Sleeve For Conductor Repair For Opgw Cable - PVC Plastic insulator tie – Henvcon

    Hot New Products Armor Rod Sleeve For Conductor Repair For Opgw Cable - PVC Plastic insulator tie – Henvcon

    Usage and characteristics PVC plastic single line/top ties are intended for use with covered conductors and vertically-mounted tie top insulators on cross arms or pole-top-mounted insulators.Line angles of up to 15°can be accommodated when used with any plastic covered conductor. Material: PVC plastic single line/top ties are made from white PVC.This material has the advantages:UV resistance,tensile strength,impact strength, flexural strength and self-extinguishing properties. Packing /shipp...